Aluminum Alloy 2014  

Composition Notes of Aluminum 2014-T6; 2014-T651 : A Zr + Ti limit of 0.20 percent maximum may be used with this alloy designation for extruded and forged products only, but only when the supplier or producer and the purchaser have mutually so agreed. Agreement may be indicated, for example, by reference to a standard, by letter, by order note, or other means which allow the Zr + Ti limit.

No Related Metal names. 


ASTM B209 ASTM BB241 QQ A-367 ASTM B247
ASTM B210 DIN 3.1255 SAE J454 ASTM B241
ASTM B211 MIL T-15089 UNS A92014 QQ A-225/4
ASTM B221 QQ A-200/2 QQ A-250/4  


Aluminum Balance
Chromium 0.1 max
Copper 3.9 - 5
Iron   0.7 max
Magnesium 0.2 - 0.8
Manganese 0.4 - 1.2
Remainder Each 0.05 max
Remainder Total 0.15 max
Silicon 0.5 - 1.2
Titanium    0.15 max
Titanium + Zinc 0.2 max
Zinc 0.25 max


  • Principal Design Features
    This is a precipitation hardening alloy with good strength after heat treatment.

  • Applications
    Commonly used in the manufacture of aircraft structures, and truck frames.

  • Other Physical Props
    Electrical conductivity 33% of copper.

  • Other Mechanical Props
    Shear strength: O (annealed) temper 18 KSI, T4 temper 38 KSI, T6 Temper 42 KSI

  • Forms & shapes
    Wire, Sheet, Plate, Strip, Round Bars, Hexagonal, Flats, Square, Angle, Channel, Blanks, Tubes, Billets, Pipes, Pipe Fittings, Forging Rings, Special Shape Forgings, Fasteners Etc.

Nickel & Alloy
Aluminum & Alloy
Stainless Steel
Titanium & Alloy
Copper & Alloy